Failover

[HS08]

Hello,

If 2 different internet connection plug to same fortinet, can we make an failover so if ISP1 down then all traffic will be routed to ISP2 automatically?

[Dongkwan · Accepted solution]

Hello,

Please refer to the link below.

*. Dual internet connections
https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/360563/dual-internet-connect...

Thanks.

[chauhans]

Hello @HS08 

You can also achieve the failover scenario by configuring SDWAN in your setup

Kindly refer below doc. link to configure SDWAN for failover:

https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/723056/link-monitoring-and-f...

https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/19246/sd-wan

Thanks,

Shaleni

[msanjaypadma]

Hi @HS08 ,

If you are not going with SDWAN setup. You may refer below article which explain with example for ISP failover with use of Link-Monitor.

https://community.fortinet.com/t5/FortiGate/Technical-Tip-Redundant-Internet-connection-without-load...

If you have found a solution, please like and mark it as solved to make it easily accessible for everyone.

Thanks,