Dear All,
I am trying to test FMG and FG in lab environment, both VMs are registered in Forti cloud (latest versions)
Tried all the possible steps to troubleshoot, changed the enc-algorithm, added the device from FG-VM security fabric manually with IP, FMG Access enabled on the corresponding interface, both devices are reachable via icmp
# Tried the below debug as stated in community forum
diagnose debug reset
diagnose debug disable
diagnose debug application depmanager 0
diagnose debug application depmanager 255
diagnose debug enable
""""
FMG-VM64-KVM # Request [dvm/cmd:dvm/cmd/discover/device ...:26295:2]:
{ "client": "dvm\/cmd:dvm\/cmd\/discover\/device ...:26295", "id": 2, "method": "exec", "params": [{ "data": { "host": "192.168.188.135", "passwd": "******", "usr": "admin"}, "target start": 1, "url": "probe\/device"}], "root": "deployment", "session": -1}
Chkperm Response [dvm/cmd:dvm/cmd/discover/device ...:26295:2]:
{ "id": 2, "result": [{ "status": { "code": 0, "message": "OK"}, "url": "probe\/device"}], "session": -1}
start_dmsvc_probe_device,788: dev_oid=0, host=192.168.188.135, flags=0x0
__enter_state,440: dev_oid=0, start check_reachable
Start probe_dev.check_reachable ...
__on_state,446: dev_oid=0, check_reachable, done, events=16 r=0
__enter_state,440: dev_oid=0, start start_probe_session
Request [dmserver:1412:16]:
{ "client": "dmserver:1412", "id": 16, "method": "exec", "params": [{ "data": { "detect_only": 0, "force_probe": 0, "ip": "192.168.188.135", "passwd": "******", "usr": "admin"}, "url": "start\/probe\/session"}], "root": "fgfm"}
Start probe_dev.start_probe_session ...
Response [unknown]:
{ "id": 16, "result": [{ "status": { "code": 1, "message": "internal error"}, "url": "start\/probe\/session"}]}
__on_state,446: dev_oid=0, start_probe_session, done, events=8 r=0
__fgfm_cb,619: error: probe_status=1, proto=1
__p_o_cleanup,548: cleanup...
__p_finish,539: status=-15, has_devinfo=0
Response [dvm/cmd:dvm/cmd/discover/device ...:26295:2]:
{ "id": 2, "result": [{ "status": { "code": -1, "message": "runtime error 0: invalid value"}, "url": "probe\/device"}]}
__o_cleanup,119: fgfm probe cleanup...
"""
Kindly assist please. thanks
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi @chandima5320 ,
Please review this article:
Please find the articles about installing of FortiManager VM:
https://community.fortinet.com/t5/FortiManager/Troubleshooting-Tip-How-to-troubleshoot-connectivity-...
https://docs.fortinet.com/document/fortimanager/7.4.0/compatibility-with-fortios
Note: The FortiManager can support only ADOMs two versions below
jokey-fmg-esx27 (central-management) # get
mode : normal
type : fortimanager
schedule-config-restore: enable
schedule-script-restore: enable
allow-push-configuration: enable
allow-push-firmware : enable
allow-remote-firmware-upgrade: enable
allow-monitor : enable
serial-number : "FMGVMxxxx"
fmg : "10.109.22.7"
fmg-source-ip : 0.0.0.0
fmg-source-ip6 : ::
local-cert :
ca-cert :
vdom : root
server-list:
fmg-update-port : 8890
include-default-servers: enable
enc-algorithm : high
interface-select-method: auto <<<< Try to change to the proper interface
Best,
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1696 | |
1091 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.