I have Fortniet Fortigate 310B.I buy this, because I need make a VPN connection. It is of course not a new unit, but used. And now I have problems with connection with this unit.
First: according instruction in internet I connect ethernet cable to Port 1, set the host IP:192.168.2.1, but Port 1 is inactive. No connection in this way.
Second way: I connect serial cable to console port, configure COM1 to 9600/8/1/none/none, start PuTTY, PuTTY is conected to Fortinet.
And now I see serial numner, and login, and a question mark.So I type: admin <Enter>, password <Enter> (without of password).
I try type "admin", "Admin","ADMIN", ....always "Login incorrect".
In instruction is, login: admin, password: none (just press Enter).
The seller assured that the device is reset to factory settings.
Factory settings are: admin/none.
What I am dooing wrong?