how should I configure ftm push feature for branch office with RIA - remote internet access through main office fortigate, the diagram is as below:
FGT-branch # config sys ftm-push
FGT-branch (ftm-push) # get
server-port : 4433
server-cert : Fortinet_Factory
server-ip : 0.0.0.0
status : disable
FGT-branch (ftm-push) # set status enable
FGT-branch (ftm-push) # end
Missing server address.
object check operator error, -56, discard the setting
Command fail. Return code -56
As I understand I need to configure on branch main office's WAN IP in the ftm-push settings, because ftp-push call will arrive at the main office WAN then should be route back to 80F - right?