FORTINAC - ENDPOINT COMPLIANCE FAILURE

[Partisan44]

Hi 

Am running Fortinac v7.4.0.0427 (GA) and the Endpoint Compliance doesn't run when a registered host connects back to the network ,or it takes very long to do so ,6+ mins

however if i scan the host ,the compliance action is executed .

Any idea why this could be happening ?

[ebilcari]

Depending on the type of options that are selected in Scan configurations, the scan can take up to 10 minutes. Usually Windows OS updates (especially in Windows 11) or if multiple antiviruses are selected, may delay the results until all the information is checked.

You can get more information about the checks and the time it takes from the Agent logs in the end host. In the general.txt file like:

2024-10-28 14:23:25 UTC :: handleReceivedPacket() -- received this packet:

Run-Policy

.

<policy name="f-Corporate-Scan" base="">

..

2024-10-28 14:23:26 UTC :: Policy f-Corporate-Scan Passed