FORTIMANAGER VM TRIAL

[jr14]

Hi 

I am doing some lab with fortimanager VM on vmware workstations

When i want to connect a FGT VM (TRIAL), I got this messages:

The FortiManager's access to the FortiGate will be authenticated by the FortiManager certificate. The serial number from the certificate must match the serial number observed on the FortiManager.

Could not connect to the FortiManager to retrieve its serial number

_______________________________________________

FMG config

config system global
set enc-algorithm low
set fgfm-ssl-protocol tlsv1.0
set oftp-ssl-protocol tlsv1.0
set ssl-low-encryption enable
set usg enable
end

__________________

FMG-VM # get system status
Platform Type : FMG-VM64
Platform Full Name : FortiManager-VM64
Version : v7.2.5-build1574 240313 (GA)
Serial Number : FMG-VMXXXXXX
BIOS version : 04000002
Hostname : FMG-VM
Max Number of Admin Domains : 2
Max Number of Device Groups : 3
Admin Domain Configuration : Enabled
FIPS Mode : Disabled
HA Mode : Stand Alone
Branch Point : 1574
Release Version Information : GA
Current Time : Sat Jun 08 17:05:13 PDT 2024
Daylight Time Saving : Yes
Time Zone : (GMT-8:00) Pacific Time (US & Canada).
x86-64 Applications : Yes
License Status : Valid

I did the lab with to version of MANAGER and always get the same error from de the fortigate

FortiGate FortiManager 

[smkml]

Hi @jr14 ,

Please configure below steps see if it helps:

Enable below config in FMG CLI:
#config system global

#set fgfm-peercert-withoutsn enable

While adding the device from FMG, in your FGT CLI, please run the command below:

#exec central-mgmt register-device <FMG S/N> <password>