FIOS 5.0 Configure Syslog

[pj255]

Can anybody confirm the correct syntax or an example of how to configure the source IP address globally for a Fortigate 1000c.

Also can someone confirm if it's possible to have all syslogs (from multiple vdoms) sent from a dedicated management VDOM ?

FG01 (global) # config log syslogd setting

FG01 (setting) # FG01 (setting) # FG01 (setting) # FG01 (setting) # set source-ip <class_ip> Class A,B,C ip xxx.xxx.xxx.xxx

FG01 (setting) # set source-ip

[Jeff_FTNT]

Yes, normally the Syslog send out from Management VDOM.

If you setup "source-ip"  , make sure "source-ip"  should be interface IP belong to Management VDOM.