FGVM+FMG

maison · ‎07-31-2019

Hello!

Im trying to connect

Fortigate FGT_VM64 v6 to FortiManager FMG_VM64_v6.2

FGT (VM02) can be connected to FMG (1000UG) successfully.

FMG: Add Device - Device found and imported ok. FMG see it in Managed Devices list.

FGT set up according to manual:

From the FortiGate CLI:
Configure central management settings:[/ol]config system central-management
config server-list
edit 1
set server-type update rating
set server-address <fortimanager_ip>
next
end
set include-default-servers disable
end

Upload the license using TFTP using the CLI:[/ol]execute restore vmlicense tftp <filename>.lic <tftp_ip>
The FortiGate will reboot.
Complete the central management configuration:[/ol]config system central-management
set fmg <fortimanager_ip>
end

Buf after inserting license file to FortiGate and execute update-now it always "Status Pending." (Status 502)

Please, any advice to fix problem.

Thanks.

Fullmoon · ‎07-31-2019

pls make sure your fortigate able to reach the internet.

Fortigate Newbie

maison · ‎07-31-2019

FGT status is VALID when connecting to internet .

But we using FGT and FMG in closed network mode.

Without access Internet FGT must be validated through Fortimanager VM.

FGVM+FMG

From the FortiGate CLI:

Nominate a Forum Post for Knowledge Article Creation

You are leaving our website