topology
FGT>>>>>L3-switch>>>l2-switch >>>PC
Can IP/mac filtering function in this design in this architecture?
Why do you need the default gateway in FGT, this point is not very understandable to me.
Is it possible to use only IP across three layers of architecture?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello jared,
Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.
Thanks,
Hello jared,
Could you please indicate us:
- Which models you are using?
- Which versions?
Thank you in advance.
Regards,
Created on 05-05-2022 12:05 AM Edited on 05-05-2022 12:16 AM
thx your reply.
FortiGate 40F、201E
I have tried using FOS7.0.0 to 7.0.5.
FortiEMS version is 7.0.3 to 7.0.4.
Fortilcient MacOS 7.0.3 to 7.0.4 .
I can get the IP address through the diagnostic command "diagnose firewall dynamic list". But it doesn't work either.
I have recommended this solution to my client, but the test results so far make me doubt the feasibility of this solution.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1502 | |
1011 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.