FGSP session monitor between FGCP clusters

[luca1994]

Hello Team,

I have two FortiGate 2600F FGCP clusters (active/standby) with FGSP enabled between them for a specific VDOM. 

I would like to verify whether FGSP sessions are synchronized and see which ones are.

The following CLI commands appear to report FGCP session information only:

diagnose sys session sync

diagnose sys session list 

How can I retrieve session information for FGSP specifically?

Thanks in advance for the support

Best Regards 

[AEK]

Hi Luca

It is the same commands as you mentioned.

The sessions should have the session state "syn_ses", as described in this tech tip.

https://community.fortinet.com/t5/FortiGate/Technical-Tip-FGSP-Configuration-Guide-for-Session-Sync-...

[wukantu1]

Is it typically the same speed as the main lan/wan links on the firewall or can it be less? In this scenario there won’t be a massive amount of asymmetric traffic due to the way the routing is being done.