Hello everyone,
I have just configured FGSP beetween pairs of FGCP clusters. I have tested some work scenarios: NAT sync, assymetric sync, failover session, DNAT sync etc. All works fine, except one problem.
I have some assymetric traffic and I reboot FGSP peer. After peer rebooted session not sync back to this peer therefore I have traffic loss.
I have found in documentation "down-intfs-before-sess-sync" option, but it doesn't help.
Should back sync session work at all? Or where I misconfigured?
Session sync works over L3 link, ForiOs 7.0.3.
Configuration:
Peer1:
config system ha
set group-id 10
set group-name "Cluster"
set mode a-p
set hbdev "port8" 0
set session-pickup enable
set session-pickup-connectionless enable
set session-pickup-expectation enable
set override disable
set priority 200
end
config system cluster-sync
edit 1
set peerip 192.168.50.200
set syncvd "root"
set down-intfs-before-sess-sync "OUT1" "OUT2"
next
end
config system standalone-cluster
set standalone-group-id 1
set group-member-id 1
end
Peer2:
config system ha
set group-id 20
set group-name "Cluster"
set mode a-p
set hbdev "port8" 0
set session-pickup enable
set session-pickup-connectionless enable
set session-pickup-expectation enable
set override disable
set priority 200
end
config system cluster-sync
edit 1
set peerip 192.168.150.200
set syncvd "root"
set down-intfs-before-sess-sync "OUT1" "OUT2"
next
end
config system standalone-cluster
set standalone-group-id 1
set group-member-id 2
end
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello,
Yes, it was a problem with virtualization environment and in production it works without problem.
Hi maxiboom, could you provide the output of command "diag sys ha stand"?
Hi @ESCHAN_FTNT ,
peer1:
Group=1, ID=1
Detected-peers=1
Kernel standalone-peers: num=1.
peer0: vfid=0, peerip:port = 192.168.50.200:708, standalone_id=2
session-type: send=1537, recv=76
packet-type: send=0, recv=0
Kernel standalone dev_base:
standalone_id=0:
standalone_id=1:
phyindex=0: mac=50:00:00:09:00:00, linkfail=1
phyindex=1: mac=50:00:00:09:00:01, linkfail=1
phyindex=2: mac=50:00:00:09:00:02, linkfail=1
phyindex=3: mac=50:00:00:09:00:03, linkfail=1
phyindex=4: mac=50:00:00:09:00:04, linkfail=1
phyindex=5: mac=50:00:00:09:00:05, linkfail=1
phyindex=6: mac=50:00:00:09:00:06, linkfail=1
phyindex=7: mac=50:00:00:09:00:07, linkfail=1
phyindex=8: mac=50:00:00:09:00:08, linkfail=1
phyindex=9: mac=50:00:00:09:00:09, linkfail=1
phyindex=10: mac=50:00:00:09:00:0a, linkfail=1
phyindex=11: mac=50:00:00:09:00:0b, linkfail=1
standalone_id=2:
phyindex=0: mac=00:09:0f:09:00:00, linkfail=1
phyindex=1: mac=00:09:0f:09:00:01, linkfail=1
phyindex=2: mac=00:09:0f:09:00:02, linkfail=1
phyindex=3: mac=00:09:0f:09:00:03, linkfail=1
phyindex=4: mac=00:09:0f:09:00:04, linkfail=1
phyindex=5: mac=00:09:0f:09:00:05, linkfail=1
phyindex=6: mac=00:09:0f:09:00:06, linkfail=1
phyindex=7: mac=00:09:0f:09:00:07, linkfail=1
phyindex=8: mac=00:09:0f:09:00:08, linkfail=1
phyindex=9: mac=00:09:0f:09:00:09, linkfail=1
phyindex=10: mac=00:09:0f:09:00:0a, linkfail=1
phyindex=11: mac=00:09:0f:09:00:0b, linkfail=1
standalone_id=3:
standalone_id=4:
standalone_id=5:
standalone_id=6:
standalone_id=7:
standalone_id=8:
standalone_id=9:
standalone_id=10:
standalone_id=11:
standalone_id=12:
standalone_id=13:
standalone_id=14:
standalone_id=15:
peer2:
Group=1, ID=2
Detected-peers=1
Kernel standalone-peers: num=1.
peer0: vfid=0, peerip:port = 192.168.150.200:708, standalone_id=1
session-type: send=30, recv=47
packet-type: send=0, recv=0
Kernel standalone dev_base:
standalone_id=0:
standalone_id=1:
phyindex=0: mac=00:09:0f:09:0a:00, linkfail=1
phyindex=1: mac=00:09:0f:09:0a:01, linkfail=1
phyindex=2: mac=00:09:0f:09:0a:02, linkfail=1
phyindex=3: mac=00:09:0f:09:0a:03, linkfail=1
phyindex=4: mac=00:09:0f:09:0a:04, linkfail=1
phyindex=5: mac=00:09:0f:09:0a:05, linkfail=1
phyindex=6: mac=00:09:0f:09:0a:06, linkfail=1
phyindex=7: mac=00:09:0f:09:0a:07, linkfail=1
phyindex=8: mac=00:09:0f:09:0a:08, linkfail=1
phyindex=9: mac=00:09:0f:09:0a:09, linkfail=1
phyindex=10: mac=00:09:0f:09:0a:0a, linkfail=1
phyindex=11: mac=00:09:0f:09:0a:0b, linkfail=1
standalone_id=2:
phyindex=0: mac=50:00:00:13:00:00, linkfail=1
phyindex=1: mac=50:00:00:13:00:01, linkfail=1
phyindex=2: mac=50:00:00:13:00:02, linkfail=1
phyindex=3: mac=50:00:00:13:00:03, linkfail=1
phyindex=4: mac=50:00:00:13:00:04, linkfail=1
phyindex=5: mac=50:00:00:13:00:05, linkfail=1
phyindex=6: mac=50:00:00:13:00:06, linkfail=1
phyindex=7: mac=50:00:00:13:00:07, linkfail=1
phyindex=8: mac=50:00:00:13:00:08, linkfail=1
phyindex=9: mac=50:00:00:13:00:09, linkfail=1
phyindex=10: mac=50:00:00:13:00:0a, linkfail=1
phyindex=11: mac=50:00:00:13:00:0b, linkfail=1
standalone_id=3:
standalone_id=4:
standalone_id=5:
standalone_id=6:
standalone_id=7:
standalone_id=8:
standalone_id=9:
standalone_id=10:
standalone_id=11:
standalone_id=12:
standalone_id=13:
standalone_id=14:
standalone_id=15:
Hi maxiboom, I dont see any particular issue here. Two things you could try though:-
1. Run 'execute sync-session" on the rebooted peer. This command works for pure FGSP only. Not sure if it could work in FGCP over FGSP setup.
2. Find the daemon "sessionsync" and try to kill the session on the rebooted peer.
If it still doesn't work, then I would suggest to open a TAC ticket for further investigation. Cheers.
Hello @ESCHAN_FTNT
1. I dind't find this command.
2. It didn't help.
I suppose, it maybe problem with virtualization environment, since I have been testing it in eve-ng. Later I can test this in real environment and will write results.Thanks for your help.
Hello,
Yes, it was a problem with virtualization environment and in production it works without problem.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1665 | |
1077 | |
752 | |
446 | |
220 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.