FG AWS HA A-P between two AZ - hasync won't work

[zerni]

Hi all,

I've created a new VPC to deploy two FG units across two AZs - communication between the units works as expected but the HA won't recognize the other unit, each unit thinks it's alone.

I've followed Fortinet's manual (Page 126 - "Deploying FortiGate-VM active-passive HA AWS between multiple zones"), step by step - excluding the management interface, and of course, used subnets that fit my needs.

On each AZ there are 3 subnets: Public, Internal, and Heartbeat. R

outing tables in place exactly as the manual shows, ACLs on NICs and Instances are as well as shown in the manual - All traffic allowed.

The configuration was made through CLI as the manual shows, edited the IPs to fit the ones I used.

Does anyone have any idea what could be the issue? or even tips on what should I double-check?

Thanks,
Ofer.

[zerni]

Managed to solve this by re-deploying the hasync NIC - deleted the current and then re-created (with the same config as the guide describes of course)