FG 600C disk full

[kev_01]

Hi,

I have fortigate 600C in version 5.0.7.

The disk is full Fortigate (100% used).

Result of command "diagnose sys logdisk usage" below :

Total HD usage: 56339MB/56339MB Total HD logging space: 28648MB Total HD logging space for each vdom: 28648MB HD logging space usage for vdom "root": 19231MB/28648MB

Logging space allocated is 28648MB, what uses 27691MB remaining ?

Sorry for my bad english.

Best regards.

[Jeff_FTNT]

Did you enable "WAN Optimization & Web Cache"  ?

It use disk too.

Check it with CLI:dia wacs stats ( for web cache disk usage)  /dia wadbd stats ( for Wanopt disk usage)

[kev_01]

Hi,

Result of the following commands :

diagnose wacs stats

wa_cs daemon is not running.

diagnose wadbd stats

wa_dbd daemon is not running.

[Jeff_FTNT]

It look something wrong.

Could you please use CLI:dia sys logdisk  quota .

[Dave_Hall]

@kev

If this was a smaller fgt (eg. 200B) and losing log data wasn't an issue, I would just reformat the log device. 

Someone correct me on this, but doesn't the "get hardware status" returns some info on the state of the flash or hard drive?  (Something along the lines of needing to reformat the logging device if you see this "error".)

[kev_01]

@Jeff

diagnose sys logdisk quota type quota(MB) usage(MB) pause ================ ============ ============ ====== disk log: 20000 0 dlp archive: 0 0 no report: 0 73 yes quarantine: 0 0 no ips archive: 0 0 no

@Dave

This can be problematic to format the hard drive.

Regards