FG 100d Multiple Wan PPPoE

[technik]

Good Afternoon, Just had BT Infinity installed today. This now requires a modem and a router compare to previous modem/router. So considered using PPPoE on the FG100D removing known vpn problems with bt routers. connected the modem up on port1 setup pppoe with correct username and password. It received the correct ip and I set up to obtain gateway. Tried to get on the internet with no luck. Checked the routing as I previously had static routing. which has been removed. The routes are there but interface states ppp1. Now I have 4 internet connections and if i connect all 4 I end up with 2 records for each connection, interfaces ppp1,ppp2,ppp3,ppp4 Due to lack of time I had to refit the modems. Would there be any problem having 4 pppoe connections? Do I need to change all my firewall policies to use interface ppp1 instead of port1? I could not find any reference through the web interface of ppp1.

[ede_pfau]

Bob, you probably don' t know how glad I am that you are always willing to step in and share your experience. I read most of the daily posts but often don' t find the time/energy to answer, or dig out the details. Then I see that you' ve already started giving hints and I think " we' ll get this tackled, let' s get at it..." . Needed to mention this.

[rwpatterson]

Thanks for the kind words. The feeling is mutual. We all have those days, but like you, I hate to see folks struggle when the answer isn' t always so far away.