FAZ-VM v5.0.10 LogView Column Problems

[AtiT]

Hi,

We are running on FAZ-VM 5.0.7 and I am wondering whether to upgrade to the 5.0.10. It seems that it should be stable and a lot of bugs are fixed.

I installed a FAZ-VM into VMWare Player v5.0.7 and I set up a FG-80D to logging into this new FAZ and imported some reports into it. Everyting is working fine.

After 24 hours I upgraded this new FAZ go 5.0.10 to check whether it is OK. I found out that there are some problems in the Log View. When I am playing around the column settings, column orders sometimes it sets all the columns active and visible with some name: dtime|1 logid|1 etc... with no log data... See the first image.

When I do some changes with the colums it gives alle the columns again with their human readable names... second image.

When I want to set the columns and order them how I want them it happens again and again...

Can anyone confirm that it is working fine and the problem is only on my side?

[scao_FTNT]

Hi, AtiT, not sure if you tried to drag/drop column in right click menu (to re-order the columns)? this is a known issue in 5.0 and after you see the issue, you may need to use right click menu "reset to default" to recover. This issue will be fixed in 5.2.2

To re-order column, you can try to do that in log view page do drag and drop

Thanks

Simon

[AtiT]

Hello Simon,

Yes, "reset to default" and drag-and-drop works.

Thank you.