FAZ HA in two different location

[rahulsharma]

"I have two FAZ devices at two different locations, and I want to configure HA between them. There is an MPLS link between the sites, and both FAZ devices are in different subnets. Can we create a VRRP cluster across two different subnets?"

[AEK]

By definition VRRP is on the same subnet.

In case you have a VxLAN over the MPLS then you may have a chance.

[rahulsharma]

I don't have VxLAN

Is there any other alternative to achieve this

[rahulsharma]

I have gone through this document as well, but it didn't help much

https://community.fortinet.com/t5/FortiAnalyzer/Technical-Tip-FortiAnalyzer-HA-Configuration-and-Tro...

[AEK]

As they said in the tech tip:

A Layer-2 connection between Primary-FortiAnalyzer and Secondary-FortiAnalyzer is mandatory to communicate through Cluster Virtual IP via VRRP.