FAZ 7.6.1 Add secondary disk on XenCenter

[franga]

Hello,
I recently performed a fresh installation of FortiAnalyzer and am encountering an issue when attempting to add a secondary hard drive. Despite following the documented procedures, I am unable to complete the operation.

Specifically:

• When using the "execute lvm extend" command, the process does not yield any meaningful result.
• The "execute lvm info" command returns the message "unavailable" on the disk 2

I have verified that the added hard drive is visible at the hardware level, but it seems that FortiAnalyzer does not recognize or properly manage it through LVM.

Could you please provide guidance on how to resolve this issue? Thank you for your support.

Best regards,

[franga · Accepted solution]

Hi,

I solved the problem. I turned off the machine, unplugged the disc and plugged it back in and now the disc is available. I then loaded the disk via CLI.