FAPU431F performance throughput

[Muhammad_Reza]

Dear All

My  FAPU431F wifi deplyoment only deliver 75 Mbps throughput (test with iperf3) while running in 5Ghz channel width 20 Mhz and 1 one channel (44 Mhz) from one client  connected (Windows 11  with notebook Intel i7) with 5 mtr distance for AP.

Is this the FAPU431  best performance ? or is there any way to improve it ?

Thanks 

#FAPU431

[Anthony_E]

Hello Muhammad,

Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

Thanks

[Anthony_E]

Hello Muhammad,

We are still looking for someone to help you.

We will come back to you ASAP.

Thanks,

[Anthony_E]

Hi,

To potentially improve the performance of your FAPU431F Wi-Fi deployment, consider the following steps:

1. Channel Width Adjustment:

   • Increase the channel width to 40 MHz or 80 MHz for the 5 GHz band to allow for higher data rates. Be cautious of potential interference with wider channels.

2. Frequency Handoff:

   • Enable frequency handoff to encourage dual-band devices to use the 5 GHz band, which typically offers better performance.

3. AP Handoff:

   • Enable AP handoff to allow the wireless controller to signal clients to switch to another access point if available, optimizing load distribution.

4. Client Load Balancing:

   • Ensure client load balancing is enabled to distribute clients evenly across available access points.

5. Interference and Placement:

   • Check for potential sources of interference and ensure optimal placement of the access point to minimize obstructions and maximize coverage.

6. Firmware Update:

   • Ensure that the FAPU431F is running the latest firmware version to benefit from performance improvements and bug fixes.

7. Signal Strength and SNR:

   • Verify that the signal strength and Signal-to-Noise Ratio (SNR) are within optimal ranges for the best performance.

By implementing these adjustments, you may be able to achieve better throughput with your FAPU431F deployment.

[megumi98]

Interesting. That’s exactly the same point that the other kind person replied with, that they have a G variant and thus put the back haul onto the 6Ghz band. That, in turn cleared up the 5Ghz radio for just data traffic.