Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Julien33x
New Contributor

F60D - Help - Internet Provider Private IP ( vlan ) - Public on another interface

Hello,

 

Internet Provider gave us , these informations "like" that :

 

Private IP on Vlan : 10.1.1.2 

Gateway : 10.1.1.1

 

Public IP : 105.105.100.100

 

For now , I am able to get access to the router from outside when :

 

On WAN1, I created a VLAN int for the Private IP

Add a route : 0.0.0.0.0/0 > 10.1.1.1

 

On WAN1 , I have tried two thing , create a vlan int with Public IP or a loopback with the IP Public too

 

For the Policy for now ,  I let Any to Any > ACCEPT

 

I also able to create a VPN between this router and another forti on another site , this is only working when I select the interface with the Public IP

 

Another thing working, is the ping only when I'm using the command : exe ping-options source 105.105.100.100

before trying to ping 8.8.8.8 for example

 

I have for now , no computer connected on local network. I am doing my test only from the web interface or CLI of the router

 

What do I need to do to not have to specify the source ping-option and enable Internet access for all and from the Router Interface or CLI

 

Thans 

Best regards

Julien

 

Add a route : 0.0.0.0.0/0 > 10.1.1.1

2 REPLIES 2
ede_pfau
SuperUser
SuperUser

Just a small tip: the default route should point to the next hop, 10.1.1.2. The other address will work as well, as ICMP will redirect it.


Ede


"Kernel panic: Aiee, killing interrupt handler!"
Ede"Kernel panic: Aiee, killing interrupt handler!"
Julien33x

I d'ont really understand 

 

10.1.1.2 is my Private IP given by ISP.

 

 

Labels
Top Kudoed Authors