Ensuring VPN redundancy

[Alex2000]

I have 2 VPN servers. I configure them in the list when setting up the VPN client. If the first server is unavailable, the client does not connect to the second server. Am I doing something wrong?

[Alex2000]

You got it wrong again. These are completely different devices. They are located in different countries. But both of them perform the same function - access to the company’s corporate resources. You can connect to any of them and get a home connection to the company’s intranet. I want to indicate them in a list, so that if one device does not respond (broken), the second one responds and gives a connection. But the Forty client does not attempt to connect to the second server in the list.

[Alex2000]

in one case there is only one server in the list that responds well. In another case, I move the same server second in the list. And the first one I register is a obviously non-existent IP. The connection will go on forever to the first one in the list, and there will be no attempt on the second one

[Alex2000]

he pictures are mixed up but I think you understand

[funkylicious]

I tried myself this setup, using a fake IP address as first Remote Gateway and the 2nd the real IP+port and worked as intended.

When I entered the user/password combo, it went to status Connecting then to about 30%, then it returned by itself to the user/password screen were it was asking me to input them again, then after 2s it connected to the 2nd remote gw because I saw the Connecting status again and went to MFA input.

Maybe it has something to do with the fact that you are using a FortiClient ZTNA edition, try downloading the VPN only version.

[Alex2000]

I started with the simple version of the client. Mini. I still have the same problem. What am I doing wrong? I installed the full version on the advice of support.

can you show your config?

[funkylicious]

Below my SSLVPN config in FCT 7.0.7, I also tested the combo of fakeIP + realIP and fakeIP + realDNS, both worked in that order of being defined/configured.

[Alex2000]

Could you please clarify which installer you have installed? In the picture in the list VPN/32/64?

[Alex2000 · Accepted solution]

7.0.7 it is work !!!!!

new version bug !