Enable intervlan routing in fortigate

[Tabish]

How to enable intervlan routing on firewall with fortiswitch connected via fortilink.
Different end device connected to Fortiswitch in different vlans need to communicate with each other and fortiswitch managing by fortigate. Fortigate needs to do intervlan routing.

Can anyone please suggest.

[AEK]

When you create VLANs on FortiLink they are already routed (directly connected), just like when you create a VLAN on a FG interface.

The only thing which prevent traffic from passing is the firewall. So you just need to create the firewall rule to allow the traffic, something like this:

• src intf: VLAN1
• dst intf: VLAN2
• src: host1
• dst: host1
• svc: ssh, ping, ...

[Dhruvin_patel]

Greetings!

Create firewall policy between two vlan to allow the traffic, https://docs.fortinet.com/document/fortigate/7.4.4/administration-guide/656084/firewall-policy

Regards,

Dhruvin Patel

[Rajan_kohli]

Hi,

you can create a policy as shown in this KB article: https://community.fortinet.com/t5/FortiGate/Technical-Tip-Configure-Inter-VLAN-

Routing/ta-p/275524

Regards

Rajan Kohli

[hjhajj]

Hello ,

You can refer to the following link 
https://docs.fortinet.com/document/fortigate/7.4.0/new-features/369021/support-inter-vlan-routing-by...