Hi Folks
Device is fortigate firewall and all subnets User, Corp, Servers are separated by VLANS interface in firewall and it does routing for us. I assume it would be pretty straight forward to change DHCP server to DHCP relay
my question is: both scopes are there in DHCP will it work and serve IP on to different subnets or do I need to enable routing and remote service in it?
present DHCP view. I want to see IP lease info in here instead of Firewall.
Pls correct me if my steps are wrong:
For wired subnet (10.x.x.x/24) Go to Network>interfaces> UserVLAN enable IN advance enable DHCP relay and DHCP relay gateway as ip addresss of this VLAN interface,add dhcp ip address.
For wireless(0.x.5.x./24) In wifi and switch controller> SSID> select SSID to relay that to DHCP server and same steps as above
Could you pls advice if my approach is correct.
Thanks
