Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Kevinta
New Contributor

Enable DHCP Option 43 on Fortinet 30OD

Hello every one,

My cisco AP ( cisco 2802iS K9) can not assign form DHCP server ( user FOrtinet300d), i refer on Cisco comunity .need enable DHCP option 43 on DHCP server,

how to enable DHCP option 43 and input correct value on Fortinet DHCP ? 

thanks so much

 

1 Solution
emnoc
Esteemed Contributor III

That great but a simplified sites has opt43 generator it might be of help

 

https://shimi.net/services/opt43/

 

 

Ken Felix

PCNSE 

NSE 

StrongSwan  

View solution in original post

PCNSE NSE StrongSwan
3 REPLIES 3
localhost
Contributor III

Looks like you copied your option 43 straight out of the manual.

In the example from the manual the primary WLC controller ist at 192.168.10.5 and secondary WLC controller at 192.168.10.20.

Which most likely is not the case in your setup?

 

This (network)guy explains it pretty well, how to get the hexstring for your setup:

 

https://networkguy.de/cisco-wlc-dhcp-option-43/

 

emnoc
Esteemed Contributor III

That great but a simplified sites has opt43 generator it might be of help

 

https://shimi.net/services/opt43/

 

 

Ken Felix

PCNSE 

NSE 

StrongSwan  

PCNSE NSE StrongSwan
Kevinta
New Contributor

thank@  emnoc ,  Mr Localhost for support  , I  was susscess with your instruction 

Labels
Top Kudoed Authors