Enable DHCP Option 43 on Fortinet 30OD

[Kevinta]

Hello every one,

My cisco AP ( cisco 2802iS K9) can not assign form DHCP server ( user FOrtinet300d), i refer on Cisco comunity .need enable DHCP option 43 on DHCP server,

how to enable DHCP option 43 and input correct value on Fortinet DHCP ? 

thanks so much

[localhost]

Looks like you copied your option 43 straight out of the manual.

In the example from the manual the primary WLC controller ist at 192.168.10.5 and secondary WLC controller at 192.168.10.20.

Which most likely is not the case in your setup?

This (network)guy explains it pretty well, how to get the hexstring for your setup:

https://networkguy.de/cisco-wlc-dhcp-option-43/

[emnoc · Accepted solution]

That great but a simplified sites has opt43 generator it might be of help

https://shimi.net/services/opt43/

Ken Felix

[Kevinta]

thank@  emnoc ,  Mr Localhost for support  , I  was susscess with your instruction