Hello,
I have a requirement, only 5Ghz and 6Ghz need to be available for an office.
Actually, only 5Ghz is available for users and it works well.
I checked this link https://docs.fortinet.com/document/fortigate/7.2.0/new-features/169732 but I need more explications.
I created a 6Ghz SSID, select WPA3 SAE et activate H2E.
Then for the Operation profile, I'm not sure according to my requirements. I understand, all the bands needs to be ON for the wifi6E, but I don't want 2.4Ghz, so I created a profile where Radio 1 is disabled, and link it to the new 6Ghz SSID. I can't made a real test until next month.
Another question, if on the 6Ghz SSID, I keep active the 2.4Ghz, it's only for 6Ghz use or a user can connect to this frequence ?
I want to know if the configuration is correct or if you have some tips.
Thank you
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1583 | |
1037 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.