EMS status unreachable for installer profil

[spoke]

All my user with the same installer profile have a status unreachable profil today.

[AEK]

Are users on fbric or off fabric?

Usually it it caused by clients can't reach EMS on port 8013.

Check with "telnet IP:8013" if the port is reachable from the clients.

You may also check if the related certificate on EMS has expired.

[spoke]

I have users on and off frabric.

yesterday all was ok but today no

i don't change anything during this night about rules !

[AEK · Accepted solution]

Did you check the certificates.