Hi EMS admins
EMS 7.4.1. I want to change the IP address of the VM.
Can I just change it at Linux level? Will EMS work properly after that? Or is any extra change required in EMS config?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Depends on how you have it set up. If the VM has a private IP, I would ensure the port forwarding on your FortiGate will point to the new IP. No other change should be needed, packets will flow to the EMS server.
If the VM has a public IP directly, or you are changing the public IP, you should check this menu and ensure it is pushing the new IP to your endpoints: https://docs.fortinet.com/document/forticlient/7.4.0/ems-administration-guide/319002/configuring-ems...
Thanks John
As long as there is nothing else to change on EMS side..
I'll share the result once I try it.
Done successfully.
I changed IP at Linux level (netplan) and rebooted. Once EMS up it shows this warning:
The server's IP address was changed. Please update the Listen on IP and FortiClient download URL in System Settings->EMS Settings.
In EMS settings, I changed the Listen IP address and FCT download URL, then all went fine.
Ah okay. Glad to hear it went well!
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1710 | |
1093 | |
752 | |
446 | |
231 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.