EMS 7.0.2 + FortiClient 7.0.2 invalid certificate

[pieciaq]

Hi,

can I use Forti Client 7.0.2 with EMS 7.0.2 when had disabled:

"Use SSL certificate for Endpoint Control" because of older FC 6.4.6 still in use.

It will no generate any issues?

In EMS 7.0.2 Release Notes I see:

"If Use SSL certificate for Endpoint Control is enabled on EMS, EMS supports the
following Forti Client (Windows) versions:
l 7.0.2 

If Use SSL certificate for Endpoint Control is disabled on EMS, EMS supports the
following Forti Client (Windows) versions:
l 7.0.0 and later"

so if "7.0.0 and later it means it will work with no problems when accept invalid cert?

[peisenberg · Accepted solution]

Hello @pieciaq 

Thank you for your query, let me try to answer you :

can I use Forti Client 7.0.2 with EMS 7.0.2 when had disabled:

"Use SSL certificate for Endpoint Control"   because of older FC 6.4.6 still in use  It will no generate any issues? >>
Yes, you can use  EMS 7.0.2 with disabled option. There should be no issue with FCT 646
IF you enable this option FCT 646 will not be able to connect but FCT 702+ will be able to connect even when no public certificate is configured in your ems. (accept invalid cert) 

Does this give any sense ? Do you need more clarification ? 

Pavol