E370LX Failover - ClientCA and CRL problem

[omglas3r]

We currently have 2 Coyote Point Equalizers E370LX running in an active/standby configuration.

I don't know if its a bug or what, but when ever a failover occurs all of our HTTPS Clusters lose their configured ClientCA and CRL and do not function.

Upon investigating the config from the CLI it appeared that on the Primary, the Cluster settings were correct, but on the Backup the ClientCA and CRL specified in the cluster configs were switched. 

Example:

Primary ClientCA: DigicertCA

Primary CRL: DigiCertCRL

on the Backup synced config:

ClientCA: DigiCertCRL

CRL: DigicertCA

This was true for all HTTPS Clusters.   So when a failover occurs, the Backup unit comes up with the wrong CA and CRLs and the clusters do not function.

The only way around the problem was for the ClientCA and the CRL to have the same name on the equalizers