Hello everyone !!
I have two WAN networks from two differents FAI.
I want that WAN1 transports only my external smtp trafic and WAN2 to handle all the remnant trafic. I can't figure out how to configure my two WANs (priority or administrative distance) end my policy route to make that happen.
Thank you in advance.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
I believe to use both WANS simultaneous the priority and admin distance need to be the same, Otherwise, the one with the lower priority would be the route the traffic follows. Once that is completed and traffic is using both internets, I would think creating a specific outbound rule to WAN1 only allowing smtp traffic and place it before any other outbound rules would do it. You may consider setting up a link monitor so that if the circuit goes down your smtp traffic could go out the other circuit. I am no expert by any means but that is what I would try.
Use SD-WAN! Create a rule that forwards SMTP traffic over WAN1 and a rule that forward everything else over WAN2.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1547 | |
1031 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.