Dual HUB desing and deploy

[longnguyen]

I have DC network space 10.10.0.0/16 with Hub-Spoke model. I am building more DR with other DC network space 10.200.0.0/16. So I am confused whether to choose Dual Hub Pri/Secon or Pri/Pri.

[funkylicious]

hi,

assumin that the same network is behind each hub, which is not the case here,

for PRI/PRI the hubs are both handling traffic/load-sharing , while in PRI/SEC just one handles the traffic and if the link is degraded it moves to the SEC.

all of these according to the doc/guides, so I guess i would go with PRI/PRI.

[longnguyen]

I see most of the guides are Pri/Sec and it say 2 HUBs use same network space.

So I'm stuck between Guide Best Practice or find a way to design my two different network subnet