- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Display of "diagnose sys ha dump-by group"
Hi,
Fortigate version v5.4.5
FG HA information
group-id : 1 group-name : hun mode : a-p password : * hbdev : "port21" 50 session-sync-dev : route-ttl : 10 route-wait : 0 route-hold : 10 sync-config : enable encryption : disable authentication : disable hb-interval : 2 hb-lost-threshold : 6 hello-holddown : 20 gratuitous-arps : enable arps : 5 arps-interval : 8 session-pickup : enable session-pickup-connectionless: disable session-pickup-delay: disable session-sync-daemon-number: 1 link-failed-signal : disable uninterruptible-upgrade: enable ha-mgmt-status : disable ha-eth-type : 8890 hc-eth-type : 8891 l2ep-eth-type : 8893 ha-uptime-diff-margin: 1 vcluster2 : disable vcluster-id : 1 override : disable priority : 200 monitor : "port15" "port25" pingserver-monitor-interface: pingserver-failover-threshold: 0 pingserver-slave-force-reset: enable pingserver-flip-timeout: 60 vdom : "root"
# diagnose sys ha dump-by group
'FG3K2C3Z12801': ha_ip_idx=1, hb_packet_version=57, last_hb_jiffies=0, linkfails=0, weight/o=0/0
'FG3K2C3Z12802: ha_ip_idx=0, hb_packet_version=53, last_hb_jiffies=6797003, linkfails=24, weight/o=0/0 hbdev_nr=1: port21(mac=0009..ae, last_hb_jiffies=6797003, hb_lost=0),
vcluster_nr=1
vcluster_0: start_time=1523412459(2018-04-11 11:07:39),[style="background-color: #ffff00;"] state/o/chg_time[/style]=2(work)/3(standby)/1523413101(2018-04-11 11:18:21)
mondev: port15(prio=50,is_aggr=0,status=1) port25(prio=50,is_aggr=0,status=1)
'FG3K2C3Z12801': ha_prio/[style="background-color: #ffff00;"]o[/style]=0/4[/style]5, link_failure=[style="background-color: #ffffff;"]0(old=0), pingsvr_failure=0, flag=0x00000001, uptime/reset_cnt=642/8 'FG3K2C3Z12802': ha_prio/[style="background-color: #ffff00;"]o[/style]=1/9[style="background-color: #ffff00;"]10, link_failure=0(old=0), pingsvr_failure=0, flag=0x00000000, uptime/reset_cnt=0/12[/style]
[style="background-color: #ffffff;"]here [/style][style="background-color: #ffffff;"]vcluster_nr=1 vcluster_0: start_time=1523412459(2018-04-11 11:07:39), state/o/chg_time=2(work)/3(standby)/1523413101(2018-04-11 11:18:21) [/style]
[<font]and
[<font]'FG3K2C3Z12801': ha_prio/[style="background-color: #ffff00;"]o[/style]=0/21[/style]22,
[<font]'FG3K2C3Z12802': ha_prio/[style="background-color: #ffff00;"]o[/style]=1/27[style="background-color: #ffff00;"]28,
[style="background-color: #ffffff;"]What do the yellow markings mean?[/style]
[style="background-color: #ffffff;"]other?? ovrride?? [/style]
[style="background-color: #ffffff;"]please answer about my question. [/style]
[style="background-color: #ffffff;"]thanks you.[/style]
- Labels:
-
5.4