- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Disconnection issue
Hello Team,
please I need your assistance on an urgent case, as recently, we have installed fortiAPs on our network, and all things are good but some users are facing an issue that the connection on their laptops keeps disconnected for 30 sec to 1 minute and then it returns to connect again, which affecting their work and productivity, has anyone faced this issue before
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi BlueP
Which firmware versions are you using?
Keep in mind using the mature/recommended versions is always the good solution for almost all issues.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
AP:231F
FW: 6.4.7
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello BlueP, Is FAP 231F also on 6.4.7? FOS: 6.4.7 is old and would recommend to upgrade to the latest.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @BlueP ,
May i know if the issue happend to:
1. Anyone connected to that 1 FortiAP.?
2. Only specific PC that connect to that 1 FortiAP?
3. Or it happend to any user that connect to that FortiAP?
Is FortiAP and LAN user sit on same VLAN? If the issue only happend to FortiAP and LAN is good, most likely FortiAP configuration issue. DHCP, Ip conflict, VLAN, etc.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Same issue my friend faced when he was doing https://community.fortinet.com/t5/Support-Forum/Disconnection-issue/td-p/295082python course and he did that step i hope this is helpful for you
- In fortiAp disconnection issue
- Make sure the users have the latest wifi
- Check out the fortiAp logs for any notification regarding it
- Adjust the channel and frequency
- Examine the network for interference sources.
- Confirm the DHCP setting for IP conflict.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
this is the logs and the issue is occuring randomly, Forti TAC is investigating as they have not know what is the issue?
Action client-disconnected-by-wtp
Reason Deauthenticated because sending STA is leaving (or has left) IBSS or ESS
![](/skins/images/EC9FF2F7BE06D4243426EA19DD2C8052/responsive_peak/images/icon_anonymous_message.png)