Hi Guys,
We are using FGT 101E 5.6.2 firmware version. I want to disable the ssl vpn setup and tried this command in cli "config vpn ssl settings set sslvpn-enable disable" however the command doesn't exist.
Thank you in advance.
Regards,
Michael
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi Michael Pls, try this... Totally disable the SSL-VPN service (both web-mode and tunnel-mode) by applying the following CLI commands:
config vpn ssl settings unset source-interface end
Note that firewall policies tied to SSL VPN will need to be unset first for the above sequence to execute successfully.
As an example, when source-interface is "port1" and SSL VPN interface is "ssl.root", the following CLI commands would be needed to ensure "unset source-interface" executes successfully:
config vpn ssl settings config authentication-rule purge (purge all authentication-rules) end
config firewall policy delete [policy-id] (SSL VPN policy ID(s) that srcintf is "ssl.root" and dstintf is "port1") end Best,
Markus
________________________________________________________
--- NSE 4 ---
________________________________________________________
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.