Help
Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
guidoq
New Contributor

Created on ‎04-03-2023 08:15 AM

Disable client-to-client traffic for same SSID wifi FortiWLS + Fortigate E300

Hello,

 

We have a ESS profile configured in a FortiWLC mapped to a vlan.

The vlan interface is configured in the fortigate.

I'm trying to find an option that blocks traffic between the devices connected to this network.

I've read that theres a "Block Intra-SSID traffic" for fortiAPs and "Block IntraVlan traffic" for fortiswitch, but I don't have those options in either device.

Is it possible to block traffic between clients with this setup?

Labels:
1747
0 Kudos
8 REPLIES 8
gfleming
Staff
Staff

Created on ‎04-03-2023 08:56 PM

There's a setting called "Access VLAN" in the VLAN config which prevents client-to-client traffic

Cheers,
Graham
1732
0 Kudos
guidoq
New Contributor
In response to gfleming

Created on ‎04-06-2023 03:41 AM

Hi gfleming,

thanks for the answer, I don't see a setting with "Access VLAN" in the fortigate device.

FortiOS v. 7.0.10 build 0450

 

RM-NODE-01 (Guest-WiFi) # show
config system interface
    edit "Guest-WiFi"
        set vdom "root"
        set ip x.x.x.x 255.255.255.0
        set allowaccess ping
        set device-identification enable
        set role lan
        set snmp-index 49
        config ipv6
            set ip6-send-adv enable
            set ip6-other-flag enable
        end
        set interface "port9"
        set vlanid 6
    next
end

 these are the option I have on the interface:

*vdom                                          Interface is in this virtual domain (VDOM).
vrf                                           Virtual Routing Forwarding ID.
mode                                          Addressing mode (static, DHCP, PPPoE).
priority                                      Priority of learned routes.
dhcp-relay-interface-select-method            Specify how to select outgoing interface to reach server.
dhcp-relay-service                            Enable/disable allowing this interface to act as a DHCP relay.
dhcp-relay-request-all-server                 Enable/disable sending of DHCP requests to all servers.
management-ip                                 High Availability in-band management IP address of this interface.
ip                                            Interface IPv4 address and subnet mask, syntax: X.X.X.X/24.
allowaccess                                   Permitted types of management access to this interface.
fail-detect                                   Enable/disable fail detection features for this interface.
dhcp-client-identifier                        DHCP client identifier.
dhcp-renew-time                               DHCP renew time in seconds (300-604800), 0 means use the renew time provided by the server.
idle-timeout                                  PPPoE auto disconnect after idle timeout seconds, 0 means no timeout.
disc-retry-timeout                            Time in seconds to wait before retrying to start a PPPoE discovery, 0 means no timeout.
padt-retry-timeout                            PPPoE Active Discovery Terminate (PADT) used to terminate sessions after an idle time.
dns-server-override                           Enable/disable use DNS acquired by DHCP or PPPoE.
dns-server-protocol                           DNS transport protocols.
arpforward                                    Enable/disable ARP forwarding.
broadcast-forward                             Enable/disable broadcast forwarding.
bfd                                           Bidirectional Forwarding Detection (BFD) settings.
l2forward                                     Enable/disable l2 forwarding.
icmp-send-redirect                            Enable/disable sending of ICMP redirects.
icmp-accept-redirect                          Enable/disable ICMP accept redirect.
reachable-time                                IPv4 reachable time in milliseconds (30000 - 3600000, default = 30000).
vlanforward                                   Enable/disable traffic forwarding between VLANs on this interface.
stpforward                                    Enable/disable STP forwarding.
ips-sniffer-mode                              Enable/disable the use of this interface as a one-armed sniffer.
ident-accept                                  Enable/disable authentication for this interface.
ipmac                                         Enable/disable IP/MAC binding.
subst                                         Enable to always send packets from this interface to a destination MAC address.
substitute-dst-mac                            Destination MAC address that all packets are sent to from this interface.
status                                        Bring the interface up or shut the interface down.
netbios-forward                               Enable/disable NETBIOS forwarding.
wins-ip                                       WINS server IP.
type                                          Interface type.
mtu-override                                  Enable to set a custom MTU for this interface.
wccp                                          Enable/disable WCCP on this interface. Used for encapsulated WCCP communication between WCCP clients and servers.
netflow-sampler                               Enable/disable NetFlow on this interface and set the data that NetFlow collects (rx, tx, or both).
sflow-sampler                                 Enable/disable sFlow on this interface.
drop-overlapped-fragment                      Enable/disable drop overlapped fragment packets.
drop-fragment                                 Enable/disable drop fragment packets.
src-check                                     Enable/disable source IP check.
sample-rate                                   sFlow sample rate (10 - 99999).
polling-interval                              sFlow polling interval in seconds (1 - 255).
sample-direction                              Data that NetFlow collects (rx, tx, or both).
explicit-web-proxy                            Enable/disable the explicit web proxy on this interface.
explicit-ftp-proxy                            Enable/disable the explicit FTP proxy on this interface.
proxy-captive-portal                          Enable/disable proxy captive portal on this interface.
tcp-mss                                       TCP maximum segment size. 0 means do not change segment size.
inbandwidth                                   Bandwidth limit for incoming traffic (0 - 80000000 kbps), 0 means unlimited.
outbandwidth                                  Bandwidth limit for outgoing traffic (0 - 80000000 kbps).
egress-shaping-profile                        Outgoing traffic shaping profile.
ingress-shaping-profile                       Incoming traffic shaping profile.
weight                                        Default weight for static routes (if route has no weight configured).
*interface                                     Interface name.
external                                      Enable/disable identifying the interface as an external interface (which usually means it's connected to the Internet).
vlan-protocol                                 Ethernet protocol of VLAN.
vlanid                                        VLAN ID (1 - 4094).
trunk                                         Enable/disable VLAN trunk.
description                                   Description.
alias                                         Alias will be displayed with the interface name to make it easier to distinguish.
security-mode                                 Turn on captive portal authentication for this interface.
device-identification                         Enable/disable passively gathering of device identity information about the devices on the network connected to this interface.
device-user-identification                    Enable/disable passive gathering of user identity information about users on this interface.
estimated-upstream-bandwidth                  Estimated maximum upstream bandwidth (kbps). Used to estimate link utilization.
estimated-downstream-bandwidth                Estimated maximum downstream bandwidth (kbps). Used to estimate link utilization.
measured-upstream-bandwidth                   Measured upstream bandwidth (kbps).
measured-downstream-bandwidth                 Measured downstream bandwidth (kbps).
bandwidth-measure-time                        Bandwidth measure time.
monitor-bandwidth                             Enable monitoring bandwidth on this interface.
vrrp-virtual-mac                              Enable/disable use of virtual MAC for VRRP.
role                                          Interface role.
snmp-index                                    Permanent SNMP Index of the interface.
secondary-IP                                  Enable/disable adding a secondary IP to this interface.
preserve-session-route                        Enable/disable preservation of session route when dirty.
auto-auth-extension-device                    Enable/disable automatic authorization of dedicated Fortinet extension device on this interface.
ap-discover                                   Enable/disable automatic registration of unknown FortiAP devices.
ip-managed-by-fortiipam                       Enable/disable automatic IP address assignment of this interface by FortiIPAM.
switch-controller-igmp-snooping-proxy         Switch controller IGMP snooping proxy.
switch-controller-igmp-snooping-fast-leave    Switch controller IGMP snooping fast-leave.
switch-controller-feature                     Interface's purpose when assigning traffic (read only).
color                                         Color of icon on the GUI.

 

1687
0 Kudos
guidoq
New Contributor
In response to gfleming

Created on ‎04-06-2023 04:35 AM

Hi gfleming,

thanks for your answer, I don't see "Access VLAN" in the fortigate vlan interface page.

Running FortiOS v7.0.10

 

here's the vlan setup:

RM-NODE-01 (Guest-WiFi) # show
config system interface
    edit "Guest-WiFi"
        set vdom "root"
        set ip x.x.x.x 255.255.255.0
        set allowaccess ping
        set device-identification enable
        set role lan
        set snmp-index 49
        config ipv6
            set ip6-send-adv enable
            set ip6-other-flag enable
        end
        set interface "port9"
        set vlanid 6
    next
end

 

and here's the option I have for the interface, am I missing something?

*vdom                                          Interface is in this virtual domain (VDOM).
vrf                                           Virtual Routing Forwarding ID.
mode                                          Addressing mode (static, DHCP, PPPoE).
priority                                      Priority of learned routes.
dhcp-relay-interface-select-method            Specify how to select outgoing interface to reach server.
dhcp-relay-service                            Enable/disable allowing this interface to act as a DHCP relay.
dhcp-relay-request-all-server                 Enable/disable sending of DHCP requests to all servers.
management-ip                                 High Availability in-band management IP address of this interface.
ip                                            Interface IPv4 address and subnet mask, syntax: X.X.X.X/24.
allowaccess                                   Permitted types of management access to this interface.
fail-detect                                   Enable/disable fail detection features for this interface.
dhcp-client-identifier                        DHCP client identifier.
dhcp-renew-time                               DHCP renew time in seconds (300-604800), 0 means use the renew time provided by the server.
idle-timeout                                  PPPoE auto disconnect after idle timeout seconds, 0 means no timeout.
disc-retry-timeout                            Time in seconds to wait before retrying to start a PPPoE discovery, 0 means no timeout.
padt-retry-timeout                            PPPoE Active Discovery Terminate (PADT) used to terminate sessions after an idle time.
dns-server-override                           Enable/disable use DNS acquired by DHCP or PPPoE.
dns-server-protocol                           DNS transport protocols.
arpforward                                    Enable/disable ARP forwarding.
broadcast-forward                             Enable/disable broadcast forwarding.
bfd                                           Bidirectional Forwarding Detection (BFD) settings.
l2forward                                     Enable/disable l2 forwarding.
icmp-send-redirect                            Enable/disable sending of ICMP redirects.
icmp-accept-redirect                          Enable/disable ICMP accept redirect.
reachable-time                                IPv4 reachable time in milliseconds (30000 - 3600000, default = 30000).
vlanforward                                   Enable/disable traffic forwarding between VLANs on this interface.
stpforward                                    Enable/disable STP forwarding.
ips-sniffer-mode                              Enable/disable the use of this interface as a one-armed sniffer.
ident-accept                                  Enable/disable authentication for this interface.
ipmac                                         Enable/disable IP/MAC binding.
subst                                         Enable to always send packets from this interface to a destination MAC address.
substitute-dst-mac                            Destination MAC address that all packets are sent to from this interface.
status                                        Bring the interface up or shut the interface down.
netbios-forward                               Enable/disable NETBIOS forwarding.
wins-ip                                       WINS server IP.
type                                          Interface type.
mtu-override                                  Enable to set a custom MTU for this interface.
wccp                                          Enable/disable WCCP on this interface. Used for encapsulated WCCP communication between WCCP clients and servers.
netflow-sampler                               Enable/disable NetFlow on this interface and set the data that NetFlow collects (rx, tx, or both).
sflow-sampler                                 Enable/disable sFlow on this interface.
drop-overlapped-fragment                      Enable/disable drop overlapped fragment packets.
drop-fragment                                 Enable/disable drop fragment packets.
src-check                                     Enable/disable source IP check.
sample-rate                                   sFlow sample rate (10 - 99999).
polling-interval                              sFlow polling interval in seconds (1 - 255).
sample-direction                              Data that NetFlow collects (rx, tx, or both).
explicit-web-proxy                            Enable/disable the explicit web proxy on this interface.
explicit-ftp-proxy                            Enable/disable the explicit FTP proxy on this interface.
proxy-captive-portal                          Enable/disable proxy captive portal on this interface.
tcp-mss                                       TCP maximum segment size. 0 means do not change segment size.
inbandwidth                                   Bandwidth limit for incoming traffic (0 - 80000000 kbps), 0 means unlimited.
outbandwidth                                  Bandwidth limit for outgoing traffic (0 - 80000000 kbps).
egress-shaping-profile                        Outgoing traffic shaping profile.
ingress-shaping-profile                       Incoming traffic shaping profile.
weight                                        Default weight for static routes (if route has no weight configured).
*interface                                     Interface name.
external                                      Enable/disable identifying the interface as an external interface (which usually means it's connected to the Internet).
vlan-protocol                                 Ethernet protocol of VLAN.
vlanid                                        VLAN ID (1 - 4094).
trunk                                         Enable/disable VLAN trunk.
description                                   Description.
alias                                         Alias will be displayed with the interface name to make it easier to distinguish.
security-mode                                 Turn on captive portal authentication for this interface.
device-identification                         Enable/disable passively gathering of device identity information about the devices on the network connected to this interface.
device-user-identification                    Enable/disable passive gathering of user identity information about users on this interface.
estimated-upstream-bandwidth                  Estimated maximum upstream bandwidth (kbps). Used to estimate link utilization.
estimated-downstream-bandwidth                Estimated maximum downstream bandwidth (kbps). Used to estimate link utilization.
measured-upstream-bandwidth                   Measured upstream bandwidth (kbps).
measured-downstream-bandwidth                 Measured downstream bandwidth (kbps).
bandwidth-measure-time                        Bandwidth measure time.
monitor-bandwidth                             Enable monitoring bandwidth on this interface.
vrrp-virtual-mac                              Enable/disable use of virtual MAC for VRRP.
role                                          Interface role.
snmp-index                                    Permanent SNMP Index of the interface.
secondary-IP                                  Enable/disable adding a secondary IP to this interface.
preserve-session-route                        Enable/disable preservation of session route when dirty.
auto-auth-extension-device                    Enable/disable automatic authorization of dedicated Fortinet extension device on this interface.
ap-discover                                   Enable/disable automatic registration of unknown FortiAP devices.
ip-managed-by-fortiipam                       Enable/disable automatic IP address assignment of this interface by FortiIPAM.
switch-controller-igmp-snooping-proxy         Switch controller IGMP snooping proxy.
switch-controller-igmp-snooping-fast-leave    Switch controller IGMP snooping fast-leave.
switch-controller-feature                     Interface's purpose when assigning traffic (read only).
color                                         Color of icon on the GUI.

thanks!

1687
0 Kudos
guidoq
New Contributor

Created on ‎04-06-2023 04:39 AM

Hi gfleming,

thanks for your answer. I don't see a "Access VLAN" option in the vlan interface page.

Running FortiOS v7.0.10

 

here's the vlan configuration:

RM-NODE-01 (Guest-WiFi) # show
config system interface
    edit "Guest-WiFi"
        set vdom "root"
        set ip x.x.x.x 255.255.255.0
        set allowaccess ping
        set device-identification enable
        set role lan
        set snmp-index 49
        config ipv6
            set ip6-send-adv enable
            set ip6-other-flag enable
        end
        set interface "port9"
        set vlanid 6
    next
end

 

and the available settings in the cli:

*vdom                                          Interface is in this virtual domain (VDOM).
vrf                                           Virtual Routing Forwarding ID.
mode                                          Addressing mode (static, DHCP, PPPoE).
priority                                      Priority of learned routes.
dhcp-relay-interface-select-method            Specify how to select outgoing interface to reach server.
dhcp-relay-service                            Enable/disable allowing this interface to act as a DHCP relay.
dhcp-relay-request-all-server                 Enable/disable sending of DHCP requests to all servers.
management-ip                                 High Availability in-band management IP address of this interface.
ip                                            Interface IPv4 address and subnet mask, syntax: X.X.X.X/24.
allowaccess                                   Permitted types of management access to this interface.
fail-detect                                   Enable/disable fail detection features for this interface.
dhcp-client-identifier                        DHCP client identifier.
dhcp-renew-time                               DHCP renew time in seconds (300-604800), 0 means use the renew time provided by the server.
idle-timeout                                  PPPoE auto disconnect after idle timeout seconds, 0 means no timeout.
disc-retry-timeout                            Time in seconds to wait before retrying to start a PPPoE discovery, 0 means no timeout.
padt-retry-timeout                            PPPoE Active Discovery Terminate (PADT) used to terminate sessions after an idle time.
dns-server-override                           Enable/disable use DNS acquired by DHCP or PPPoE.
dns-server-protocol                           DNS transport protocols.
arpforward                                    Enable/disable ARP forwarding.
broadcast-forward                             Enable/disable broadcast forwarding.
bfd                                           Bidirectional Forwarding Detection (BFD) settings.
l2forward                                     Enable/disable l2 forwarding.
icmp-send-redirect                            Enable/disable sending of ICMP redirects.
icmp-accept-redirect                          Enable/disable ICMP accept redirect.
reachable-time                                IPv4 reachable time in milliseconds (30000 - 3600000, default = 30000).
vlanforward                                   Enable/disable traffic forwarding between VLANs on this interface.
stpforward                                    Enable/disable STP forwarding.
ips-sniffer-mode                              Enable/disable the use of this interface as a one-armed sniffer.
ident-accept                                  Enable/disable authentication for this interface.
ipmac                                         Enable/disable IP/MAC binding.
subst                                         Enable to always send packets from this interface to a destination MAC address.
substitute-dst-mac                            Destination MAC address that all packets are sent to from this interface.
status                                        Bring the interface up or shut the interface down.
netbios-forward                               Enable/disable NETBIOS forwarding.
wins-ip                                       WINS server IP.
type                                          Interface type.
mtu-override                                  Enable to set a custom MTU for this interface.
wccp                                          Enable/disable WCCP on this interface. Used for encapsulated WCCP communication between WCCP clients and servers.
netflow-sampler                               Enable/disable NetFlow on this interface and set the data that NetFlow collects (rx, tx, or both).
sflow-sampler                                 Enable/disable sFlow on this interface.
drop-overlapped-fragment                      Enable/disable drop overlapped fragment packets.
drop-fragment                                 Enable/disable drop fragment packets.
src-check                                     Enable/disable source IP check.
sample-rate                                   sFlow sample rate (10 - 99999).
polling-interval                              sFlow polling interval in seconds (1 - 255).
sample-direction                              Data that NetFlow collects (rx, tx, or both).
explicit-web-proxy                            Enable/disable the explicit web proxy on this interface.
explicit-ftp-proxy                            Enable/disable the explicit FTP proxy on this interface.
proxy-captive-portal                          Enable/disable proxy captive portal on this interface.
tcp-mss                                       TCP maximum segment size. 0 means do not change segment size.
inbandwidth                                   Bandwidth limit for incoming traffic (0 - 80000000 kbps), 0 means unlimited.
outbandwidth                                  Bandwidth limit for outgoing traffic (0 - 80000000 kbps).
egress-shaping-profile                        Outgoing traffic shaping profile.
ingress-shaping-profile                       Incoming traffic shaping profile.
weight                                        Default weight for static routes (if route has no weight configured).
*interface                                     Interface name.
external                                      Enable/disable identifying the interface as an external interface (which usually means it's connected to the Internet).
vlan-protocol                                 Ethernet protocol of VLAN.
vlanid                                        VLAN ID (1 - 4094).
trunk                                         Enable/disable VLAN trunk.
description                                   Description.
alias                                         Alias will be displayed with the interface name to make it easier to distinguish.
security-mode                                 Turn on captive portal authentication for this interface.
device-identification                         Enable/disable passively gathering of device identity information about the devices on the network connected to this interface.
device-user-identification                    Enable/disable passive gathering of user identity information about users on this interface.
estimated-upstream-bandwidth                  Estimated maximum upstream bandwidth (kbps). Used to estimate link utilization.
estimated-downstream-bandwidth                Estimated maximum downstream bandwidth (kbps). Used to estimate link utilization.
measured-upstream-bandwidth                   Measured upstream bandwidth (kbps).
measured-downstream-bandwidth                 Measured downstream bandwidth (kbps).
bandwidth-measure-time                        Bandwidth measure time.
monitor-bandwidth                             Enable monitoring bandwidth on this interface.
vrrp-virtual-mac                              Enable/disable use of virtual MAC for VRRP.
role                                          Interface role.
snmp-index                                    Permanent SNMP Index of the interface.
secondary-IP                                  Enable/disable adding a secondary IP to this interface.
preserve-session-route                        Enable/disable preservation of session route when dirty.
auto-auth-extension-device                    Enable/disable automatic authorization of dedicated Fortinet extension device on this interface.
ap-discover                                   Enable/disable automatic registration of unknown FortiAP devices.
ip-managed-by-fortiipam                       Enable/disable automatic IP address assignment of this interface by FortiIPAM.
switch-controller-igmp-snooping-proxy         Switch controller IGMP snooping proxy.
switch-controller-igmp-snooping-fast-leave    Switch controller IGMP snooping fast-leave.
switch-controller-feature                     Interface's purpose when assigning traffic (read only).
color                                         Color of icon on the GUI.

Is there something I'm missing?

thanks!

1687
0 Kudos
guidoq
New Contributor

Created on ‎04-06-2023 04:40 AM Edited on ‎04-06-2023 04:42 AM

Hi gfleming,

thanks for your answer. I don't see a "Access VLAN" option in the vlan interface page.

Running FortiOS v7.0.10

 

here's the vlan configuration:

RM-NODE-01 (Guest-WiFi) # show
config system interface
edit "Guest-WiFi"
set vdom "root"
set ip x.x.x.x 255.255.255.0
set allowaccess ping
set device-identification enable
set role lan
set snmp-index 49
config ipv6
set ip6-send-adv enable
set ip6-other-flag enable
end
set interface "port9"
set vlanid 6
next
end


and the available settings in the cli:

*vdom Interface is in this virtual domain (VDOM).
vrf Virtual Routing Forwarding ID.
mode Addressing mode (static, DHCP, PPPoE).
priority Priority of learned routes.
dhcp-relay-interface-select-method Specify how to select outgoing interface to reach server.
dhcp-relay-service Enable/disable allowing this interface to act as a DHCP relay.
dhcp-relay-request-all-server Enable/disable sending of DHCP requests to all servers.
management-ip High Availability in-band management IP address of this interface.
ip Interface IPv4 address and subnet mask, syntax: X.X.X.X/24.
allowaccess Permitted types of management access to this interface.
fail-detect Enable/disable fail detection features for this interface.
dhcp-client-identifier DHCP client identifier.
dhcp-renew-time DHCP renew time in seconds (300-604800), 0 means use the renew time provided by the server.
idle-timeout PPPoE auto disconnect after idle timeout seconds, 0 means no timeout.
disc-retry-timeout Time in seconds to wait before retrying to start a PPPoE discovery, 0 means no timeout.
padt-retry-timeout PPPoE Active Discovery Terminate (PADT) used to terminate sessions after an idle time.
dns-server-override Enable/disable use DNS acquired by DHCP or PPPoE.
dns-server-protocol DNS transport protocols.
arpforward Enable/disable ARP forwarding.
broadcast-forward Enable/disable broadcast forwarding.
bfd Bidirectional Forwarding Detection (BFD) settings.
l2forward Enable/disable l2 forwarding.
icmp-send-redirect Enable/disable sending of ICMP redirects.
icmp-accept-redirect Enable/disable ICMP accept redirect.
reachable-time IPv4 reachable time in milliseconds (30000 - 3600000, default = 30000).
vlanforward Enable/disable traffic forwarding between VLANs on this interface.
stpforward Enable/disable STP forwarding.
ips-sniffer-mode Enable/disable the use of this interface as a one-armed sniffer.
ident-accept Enable/disable authentication for this interface.
ipmac Enable/disable IP/MAC binding.
subst Enable to always send packets from this interface to a destination MAC address.
substitute-dst-mac Destination MAC address that all packets are sent to from this interface.
status Bring the interface up or shut the interface down.
netbios-forward Enable/disable NETBIOS forwarding.
wins-ip WINS server IP.
type Interface type.
mtu-override Enable to set a custom MTU for this interface.
wccp Enable/disable WCCP on this interface. Used for encapsulated WCCP communication between WCCP clients and servers.
netflow-sampler Enable/disable NetFlow on this interface and set the data that NetFlow collects (rx, tx, or both).
sflow-sampler Enable/disable sFlow on this interface.
drop-overlapped-fragment Enable/disable drop overlapped fragment packets.
drop-fragment Enable/disable drop fragment packets.
src-check Enable/disable source IP check.
sample-rate sFlow sample rate (10 - 99999).
polling-interval sFlow polling interval in seconds (1 - 255).
sample-direction Data that NetFlow collects (rx, tx, or both).
explicit-web-proxy Enable/disable the explicit web proxy on this interface.
explicit-ftp-proxy Enable/disable the explicit FTP proxy on this interface.
proxy-captive-portal Enable/disable proxy captive portal on this interface.
tcp-mss TCP maximum segment size. 0 means do not change segment size.
inbandwidth Bandwidth limit for incoming traffic (0 - 80000000 kbps), 0 means unlimited.
outbandwidth Bandwidth limit for outgoing traffic (0 - 80000000 kbps).
egress-shaping-profile Outgoing traffic shaping profile.
ingress-shaping-profile Incoming traffic shaping profile.
weight Default weight for static routes (if route has no weight configured).
*interface Interface name.
external Enable/disable identifying the interface as an external interface (which usually means it's connected to the Internet).
vlan-protocol Ethernet protocol of VLAN.
vlanid VLAN ID (1 - 4094).
trunk Enable/disable VLAN trunk.
description Description.
alias Alias will be displayed with the interface name to make it easier to distinguish.
security-mode Turn on captive portal authentication for this interface.
device-identification Enable/disable passively gathering of device identity information about the devices on the network connected to this interface.
device-user-identification Enable/disable passive gathering of user identity information about users on this interface.
estimated-upstream-bandwidth Estimated maximum upstream bandwidth (kbps). Used to estimate link utilization.
estimated-downstream-bandwidth Estimated maximum downstream bandwidth (kbps). Used to estimate link utilization.
measured-upstream-bandwidth Measured upstream bandwidth (kbps).
measured-downstream-bandwidth Measured downstream bandwidth (kbps).
bandwidth-measure-time Bandwidth measure time.
monitor-bandwidth Enable monitoring bandwidth on this interface.
vrrp-virtual-mac Enable/disable use of virtual MAC for VRRP.
role Interface role.
snmp-index Permanent SNMP Index of the interface.
secondary-IP Enable/disable adding a secondary IP to this interface.
preserve-session-route Enable/disable preservation of session route when dirty.
auto-auth-extension-device Enable/disable automatic authorization of dedicated Fortinet extension device on this interface.
ap-discover Enable/disable automatic registration of unknown FortiAP devices.
ip-managed-by-fortiipam Enable/disable automatic IP address assignment of this interface by FortiIPAM.
switch-controller-igmp-snooping-proxy Switch controller IGMP snooping proxy.
switch-controller-igmp-snooping-fast-leave Switch controller IGMP snooping fast-leave.
switch-controller-feature Interface's purpose when assigning traffic (read only).
color Color of icon on the GUI.
Is there something I'm missing?

thanks!

1688
0 Kudos
guidoq
New Contributor

Created on ‎04-06-2023 04:44 AM

Hi gfleming,

thanks for the answer,

I'm trying to post a reply with my configuration but it disappears after I reload the page.

Anyway I don't have a "Access VLAN" setting in the vlan interface page. I'm currently running FortiOS 7.0.10

1708
0 Kudos
guidoq
New Contributor

Created on ‎04-06-2023 04:47 AM 

RM-NODE-01 (Guest-WiFi) # show
config system interface
edit "Guest-WiFi"
set vdom "root"
set ip x.x.x.x 255.255.255.0
set allowaccess ping
set device-identification enable
set role lan
set snmp-index 49
config ipv6
set ip6-send-adv enable
set ip6-other-flag enable
end
set interface "port9"
set vlanid 6
next
end
1704
0 Kudos
gfleming
Staff
Staff
In response to guidoq

Created on ‎04-06-2023 09:04 AM

Try "set switch-controller-access-vlan enable"

 

In the 7.X GUI i think it's renamed "Block Intra-VLAN Traffic"

Cheers,
Graham
1692
0 Kudos
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors
View all
Broad. Integrated. Automated.

The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.

Social Media
Security Research
Company
News & Articles
Contact Us

Copyright 2024 Fortinet, Inc. All Rights Reserved.