Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
atsak
New Contributor III

Disable all UTM filtering

I'd like to know if there's an easy set of CLI commands that disables web filtering, SSL screening, antivirus, any ALG etc. etc.     I've had a couple weird issues where traffic to one IP over VPN stops working (it's to our PBX, and it's SIP traffic, but inside the VPN).     Everything else on the VPN subnet is fine, and I haven't had time to run a debug yet to see what's causing it (it's kinda a big deal when the phones don't work).

 

I was thinking if I turned everything off then turned things on one at a time until it happened it might just give a quicker resolution.   We don't really need any of the UTM features; we're replacing Netscreen firewalls which never had it before anyway.

 

 

 

 

2 REPLIES 2
FGTuser
New Contributor III

Disable SIP ALG/session helper.

UTM is not active in case you haven't UTM profile on policy.

 

http://kb.fortinet.com/kb/viewContent.do?externalId=FD36405&sliceId=1

 

emnoc
Esteemed Contributor III

UTM is not enable untiil you enable it in a fwpolicy .

 

PCNSE 

NSE 

StrongSwan  

PCNSE NSE StrongSwan
Labels
Top Kudoed Authors