- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dialup - FortiClient (Windows, Mac OS, Android) status inactive
I created Dialup - FortiClient (Windows, Mac OS, Android) to connect through the Forticlient.
But in the ipsec - tunells status inactive.Why?
FortiOs v5.2.11,build754
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Because nobody has dialled in yet.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
forticlient does not connect
used this instruction [link]https://www.youtube.com/watch?v=5MIrgkFcuW0[/link]
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
-Is the server reachable? -> ping from the client device to your FG
-Is the vpn request packets hitting the FG interface? -> sniff at the interface while try connecting (diag sniffer packet INTERFACE 'host SOURCE_PUB_IP')
If not, you need to troubleshoot the client device and local internet.
If both are ok, you need to run ike app debug on the FG like in below cookbook.
http://cookbook.fortinet.com/ipsec-vpn-troubleshooting/
That would probably tell you why your FG doesn't accept the vpn request.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Palamar ,
did you solved this issue ?
