Diagnose VPN

[JohnAgora]

Hello,

I have a device running 5.2.7 with over 1,000 dialup VPNs at every moment.

I need to debug a VPN that is not being properly stabilished.

Anyhow if I do:

diagnose debug enable

diagnose debug application ike -1

I see lots of information.

Especially all the (R-U-THERE) messages (lots and lots).

If I use diagnose vpn ike log-filter src-addr4 x.x.x.x I can't get all the relevant info.

Any idea on how can I make a more effective debug through cli?

Thanks!

[Arshad_Ali]

Is it possible to transmit broadcast via UDP ports while being connected on dialup VPN from Internet.

We have custom dialup tunnel from our office to client end.

VPN is connected but i need to find a way where my source IP should be that of server (generating broadcast) and destination address should be 255.255.255.255.

When i run WIreshark on VPN i am unable to find any packet from my server's source address rather its the Vitual address of VPN in the source.

please suggest.