Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
misha
New Contributor II

Devices can't see each other across different APs

Hello,

We've got a problem in our network. When devices are connected to two different access points (Local-WiFi-radio and FortiAP-221E), they can't seem to find each other even though they're on the same SSID. But, if they're connected to the same access point, everything works fine. Devices operate in Tunnel mode.

We made sure that the setting which stops devices from talking to each other (client isolation) is turned off on both the access points. Also, we checked that both are set up to work in the same subnet. Still, we're stuck with this issue.


We're using a FortiWiFi 40F and a FortiAP 221-E.

Problem:
ClientA -> FortiAP1 -> FortiGate (FortiWiFI)-> FortiAP2(FortiWiFi) -> ClientB - Ping Fail
ClientA -> FortiAP1 -> FortiGate (FortiWiFI)-> FortiAP1 -> ClientB - Ping Success
ClientA -> FortiAP2(FortiWiFi) -> FortiGate (FortiWiFI) -> FortiAP2(FortiWiFi) -> ClientB - Ping Success

13 REPLIES 13
misha
New Contributor II

Hello! Thank you and sorry for waiting.
I know the interface of my external FortiAP and I have policies
FortiAP1->WiFi-SSID ALLOW
WiFi-SSID->FortiAP1 ALLOW
But I don't know how to configure a firewall rule for FortiAP2 (FortiWiFi). I see that FortiAP2(FortiWiFi) has an address of 127.0.0.1 (see screenshot)image.png

misha
New Contributor II

Problem is actual :(

victord
New Contributor

deleted

RolandSpierings
New Contributor

I had exact this same issue. For me the solution was the dissable the Block intra-VLAN traffic in the VLAN configuration.

 
 

2024_08_30_15_17_13_Window.png

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors