- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Device level settings changed
Hi everyone.
I have been working with fortimanager for a few days, right now I have a problem when a try to send the policy packages to the fortigates.
The problem is that one of the interface´s settings that I´ve configured is different between what the fortiManager tries to send and I dont now why.
Solved! Go to Solution.
- Labels:
-
FortiManager
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I believe you have a config conflict in interface mapping.
I can help you here if you could let me know, where exactly the error comes in?
While trying to synchronize the policy packages from fortimanager to remote fortigate, could you see any error such as "zone validation failed"?
If possible please share the screenshot or let me exactly know at what stage the error occurs.
Also I would like to know the fortigate and and fortimanager version as well.
Thanks,
Saifin Thomas
Regards,
Saifin Thomas
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I believe you have a config conflict in interface mapping.
I can help you here if you could let me know, where exactly the error comes in?
While trying to synchronize the policy packages from fortimanager to remote fortigate, could you see any error such as "zone validation failed"?
If possible please share the screenshot or let me exactly know at what stage the error occurs.
Also I would like to know the fortigate and and fortimanager version as well.
Thanks,
Saifin Thomas
Regards,
Saifin Thomas
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
There is not an error actually.
The device level settings and the config status remains in "sync" state, the problem comes when I modified the policy package and try to send to the fortigate.
This is what i have in the interface settings.
This is what the FortiManager tries to send, the FortiManager always modify the interface´s settings named "Tienda" changed the address range for all managed devices.
FrotiManager: 6.2.2
Fortigates: 6.2.2
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I understood that, your fortimanager is trying to push wrong config to your remote fortigate! Correct me if i am wrong.
In this case, Please do retrieve your fortigate configuration to fortimanager device database and then import those configs to ADOM database. If so, your fortimanager database will be updated with fortigate configurations and it won't try to push the config to fortigate again.
This happens when fortimanager identifies any config changes in remote fortigate during the checksum validation.
**Please do post here if you have any concerns regarding steps which need to be followed to achieve this.**
Thanks,
Saifin Thomas
Regards,
Saifin Thomas
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi.
This is what I did.
2.- then import the settings from the fortigate to the fortimanager
but keep trying to send the same wrong configuration
I don't know if I'm importing the settings correctly but if I look at the database view the configurations are good.
[ul]Thanks
