Device detection not available on ssl.root interface on 5.6.1

[neonbit]

I've recently upgraded my FG201E to 5.6.1 and for some reason devices connecting via SSLVPN are now showing up correctly in FortiView (ie: can't determine their OS).

This was working fine in 5.6.0, where I could see users, forticlient status and device type in FortiView.

Had a look at the ssl.root interface and can't see the device detection options available (as they are for other interfaces).

Does anyone know if there's a way to enable this?

[storaid]

my problem is failed ssl-vpn policy access when device-identification was added for Windows device...

Endpoint Registration from ssl-vpn has been enabled..

try to enable endpoint-compliance in the CLI will cause all ssl-vpn traffic was blocked..

few days ago, I have opened new ticket to talk my problem...

I tested android device with forticlient ssl-vpn ...

seems like it does get good working with device-identification...

but windows os...

it ALWAYS failed...

are you using windows with forticlient???...

[storaid]

for Windows device:

[neonbit]

Hi Storaid, I'm using a windows device with Forticlient. It's showing up connect just like yours but I dont have device identification enabled.

Just to confirm, if you connect to the SSLVPN, can you see the device as a windows PC under FortiView?

[storaid]

neonbit wrote:

Hi Storaid, I'm using a windows device with Forticlient. It's showing up connect just like yours but I dont have device identification enabled.

Just to confirm, if you connect to the SSLVPN, can you see the device as a windows PC under FortiView?

NO, looks like the device from sslvpn can NOT be identified with device-detection function...

actually, I mean...

since v5.6.x, the device detection is too bad...

its accuracy sucks...

even if the windows device is under the internal LAN, the device-detection often can not correctly identify this device...

I believe they do change something about this function to make it too bad...