Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
KenjiKang
New Contributor II

Detailed Specifications of  File System Check Recommended

Hi, 
As someone who proposes and implements FortiGate solutions for clients,
I have received detailed inquiries from them regarding the “File System Check Recommended” message.
I understand that this message appears when a proper shutdown cannot be performed. However,
I would appreciate any advice on the following points that I was unable to investigate further.


  • If the message is canceled once, will it no longer appear again?

  • Is it possible to reproduce the same message even after canceling it?

  • Is there an alternative method to check for errors in the file system?

Thanks, Kenji

1 Solution
Markus_M

Hello Kenji-san,

 

unfortunately the file system check can only be done when the actual OS is offline and not using it. The check is done right after reboot, before the OS is loaded.
As such, you can do the file system check any time with the need of a reboot. The check is done after it.

I recommend enabling the option to automatically do that on every reboot (since reboots are typically planned anyway).

 

Best regards,

 

Markus

- Markus

View solution in original post

4 REPLIES 4
Markus_M
Staff & Editor
Staff & Editor

Hi Kenji,

 

The message will re-appear and also will be displayed in the notifications.
Most is explained here:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-File-System-check-recommended-message/ta-p...
You should enable the automatic file system check and at the next reboot, intended or not, the check is done, if required. 

 

Best regards,

 

Markus

- Markus
KenjiKang
New Contributor II

Markus-san

Thank you for your quick and kindly advices.
Thank you for introducing the knowledge site; it was very helpful.

If you know of any additional commands that would allow us to conduct the same checks, it would be greatly appreciated.
This is because our client is concerned about the equipment being offline for an extended period during checks.

Thanks,Kenji



Markus_M

Hello Kenji-san,

 

unfortunately the file system check can only be done when the actual OS is offline and not using it. The check is done right after reboot, before the OS is loaded.
As such, you can do the file system check any time with the need of a reboot. The check is done after it.

I recommend enabling the option to automatically do that on every reboot (since reboots are typically planned anyway).

 

Best regards,

 

Markus

- Markus
KenjiKang
New Contributor II

Markus-san
Thank you for your kindly advices.
I understand thst this cheking operation before running.
And I disscuss to fix this operation with customer.
Thanks Kenji

Announcements
Check out our Community Chatter Blog! Click here to get involved
Labels
Top Kudoed Authors