Help
Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
support12
New Contributor III

Created on ‎11-24-2008 02:02 PM

Destinations Translations

How i change the destination ip. Instead of source nat i want dst nat. Example every pc that try to reach 13.13.13.1 i will change to 202.00.200.1 internal ip 192.168.10.1 going to 200.200.200.1 the traffic will show source ip translated source ip translated destination ip destination ip 192.168.10.1 12.12.12.1 200.200.200.1 13.13.13.1
1086
0 Kudos
3 REPLIES 3
abelio
SuperUser
SuperUser

Created on ‎11-24-2008 02:13 PM

look into ' FortiGate Version 3.0 MR7 Administration Guide' , specifically ' Configuring firewall policies' part.

regards




/ Abel

regards / Abel
882
0 Kudos
support12
New Contributor III
In response to abelio

Created on ‎11-24-2008 02:50 PM

Very weird.\\\ give and example of the virtual ip that mat DNat
887
0 Kudos
rwpatterson
Valued Contributor III
In response to support12

Created on ‎11-24-2008 07:08 PM

Sounds like it may be possible with an outbound VIP for the destination NAT, and an address pool for the source NAT. Treat both NATs individually so as not to confuse yourself, and seek instructions from the guide posted above. Good luck

Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com

Bob - self proclaimed posting junkie!See my Fortigate related scripts at: http://fortigate.camerabob.com
887
0 Kudos
Labels
Top Kudoed Authors
View all
Broad. Integrated. Automated.

The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.

Social Media
Security Research
Company
News & Articles
Contact Us

Copyright 2024 Fortinet, Inc. All Rights Reserved.