Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
AliAllafzadeh
New Contributor III

Delete it please

 

Delete it please

13 REPLIES 13
AEK
SuperUser
SuperUser

Hi Ali

Can you share this output?

get system ha status 
AEK
AEK
AliAllafzadeh
New Contributor III

Delete it please

AEK

Hi Ali

Node B did not join the cluster. Can they ping each others from port3?

AEK
AEK
AliAllafzadeh
New Contributor III

Delete it please

AEK

Hi Ali

No need to setup FGCP.

Standalone config sync is a kind of cluster, that's why you should see second node in get sys ha status.

https://docs.fortinet.com/document/fortigate/6.2.15/cookbook/84777/using-standalone-configuration-sy...

Try check cluster logs or use debug to check why node B is not joining.

AEK
AEK
AliAllafzadeh
New Contributor III

Delete it please

AEK

Actually FOS 7.4.2 has pretty much issues. So I'll try do the same on a stable version (7.0.13 or 7.2.6) and I'll let you know. You can try the same from your side.

AEK
AEK
ebilcari
Staff
Staff

FGSP is used only to share sessions between standalone FGT devices or a FGCP cluster. Since nodes are standalone, the configuration has to be done separately on both nodes.

- Emirjon
If you have found a solution, please like and accept it to make it easily accessible for others.
AliAllafzadeh

Delete it please

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors