Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
TT_DU
New Contributor

DUAL HUB SETUP FOR ADVPN and SDWAN FOR BRANCH OFFICES

Hi All,

I am planning to setup the below. Using FGT 7.2.4, If you see any bug also please highlight.

 

Spoke 1 & 2  -------> Hub 1 & Spoke 1 & 2  -------> Hub 2 (Using ADVPN -iBGP)

-------------------

Spoke1 & 2 need to be connected with Hub 1 and Hub2 (Both hubs are running with separate services)

Spoke 1 & Spoke 2 need to be communicated with each other.

Hub 1 and Hub 2 need to be communicated.

All the tunnel interfaces (From Branch to hub 1 and hub 2) in the same Overlay Zone.

--------------------------------

To achieve the above setup using the below protocols.

Between Spoke 1 & 2 ----> Hub 1 & 2 using iBGP (all Spoke and hub locations in the same iBGP AS number)

Between Hub 1 & 2 also using eBGP (or may be iBGP).

------------------------------------

Do you see any challenges on the above setup?

If you have any suggestion then please let me know.

30 REPLIES 30
freddelm
New Contributor II

I would be nice if FNT put a full complete guide with working configs.

They have this guide for multiple hubs but is missing key information

https://docs.fortinet.com/document/fortimanager/7.2.0/multiple-datacenters-for-enterprise-primary-pr...

 

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors