Hi All,
I am planning to setup the below. Using FGT 7.2.4, If you see any bug also please highlight.
Spoke 1 & 2 -------> Hub 1 & Spoke 1 & 2 -------> Hub 2 (Using ADVPN -iBGP)
-------------------
Spoke1 & 2 need to be connected with Hub 1 and Hub2 (Both hubs are running with separate services)
Spoke 1 & Spoke 2 need to be communicated with each other.
Hub 1 and Hub 2 need to be communicated.
All the tunnel interfaces (From Branch to hub 1 and hub 2) in the same Overlay Zone.
--------------------------------
To achieve the above setup using the below protocols.
Between Spoke 1 & 2 ----> Hub 1 & 2 using iBGP (all Spoke and hub locations in the same iBGP AS number)
Between Hub 1 & 2 also using eBGP (or may be iBGP).
------------------------------------
Do you see any challenges on the above setup?
If you have any suggestion then please let me know.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
I would be nice if FNT put a full complete guide with working configs.
They have this guide for multiple hubs but is missing key information
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1547 | |
1031 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.