I have 4 Recursive DNS servers that i puted behind NAT. Lets say 10.254.254.10-13
I want to make loadbalancing and HA and present them under 2 public IPs.
Each public IP will have 2 real DNS server for HA and Balancing.
What is the best way to set this up?
I created Virtual server with one of public IPs.
Type: UDP, Virtual server port 53. Load Balancing Round Robin, Healt Check: DNS.
I added under "Real Servers" 2 IPs 10.254.254.10-11
But it is not working.
The public IP i have set up as Virtual Server IP is the WAN interface IP.
Is it necesery to set up anything else?
Or i am doing it comlpetly wrong?
Thanx for help!
Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.
We are still looking for someone to help you.
We will come back to you ASAP.
When you say it is not working, is it the load balancing not working or the reachability towards the server?
Are you seeing the DNS packets reaching Fortigate? Are they getting NATed to the private IPs?
- Have you found a solution? Then give your helper a "Kudos" and mark the solution.
Suraj , seems NAT configured is wrong .. sending to the interface
"The public IP i have set up as Virtual Server IP is the WAN interface IP."
Setting UP WAN IP will not forward the traffic. Setting UP WAN IP means, you are sending the traffic destined to the interface not for forwarding. You need to use a free Public IP pool for the NAT.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2023 Fortinet, Inc. All Rights Reserved.