DNS Virtual Server load balancing to real servers while preserving client IP

[mrc]

I have 4 real DNS servers behind a common Virtual Server using UDP forwarding on port 53 on our FortiGate that has been working for several years. I now have the requirement for the client IP to be preserved for the DNS servers so they can apply their own policies to the client traffic based on source IP. It is currently being replaced by the FortiGate's IP.

Any suggestions on how to achieve this?

Cheers - Mike

SOLVED: it was easier than NAT(which was not on) it was the flow/proxy setting - oops

[AEK]

Are you doing NAT in the related firewall policy?

You should remove it.

[ezhupa · Accepted solution]

Hello,

Try disabling NAT on the FW policy first. 

Or in the Virtual Server configuration you should have an option in the GUI. 
"Preserve client IP". By default it is disabled. Toggle it and enable. 
https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-Preserving-the-original-source-IP-wh....