Hi All,
Just want a quick help on our issue with High DNS Issue.
I have seen this article below.
https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/126629
And I am just wondering would it be service affecting if you would run commands like the following:
diagnose test application dnsproxy
1. Clear DNS cache
2. Dump DNS Setting
3. Reload FQDN
4. DNS debug bit mask
5. DNS debug obj mem
6. Restart dnsproxy worker
ETC.
REGARDS
NICKO
Hello
As per my experience this latency value is not to take in consideration as long as your DNS server responds to queries in time.
Hi @imuscleupcarat,
Are those DNS servers in the same subnet as FortiGate? Which protocol are you using? Please provide the output of this command "show full system dns" if possible.
Regards,
Hi They are using UDP port 53,
Can you confirm if the commands on my post are service affecting when run?
Hi @imuscleupcarat,
Please refer to this document for more detail https://community.fortinet.com/t5/FortiGate/Technical-Note-FortiGate-Troubleshooting-DNS-commands/ta....
Also, for this high latency, what is the protocol you are using and have you tried different DNS server?
They are using UDP port 53
Yes I have seen this article already and none of it states if it will be service impacting when running those commands. that is what i want to confirm
Created on 01-18-2024 05:55 PM Edited on 01-18-2024 05:55 PM
hi,
where are your DNS hosted? is it within or outside your country/region?
did you encounter this issue prior to 7.4?
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1737 | |
1107 | |
752 | |
447 | |
240 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.