Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
ianmclachlan
New Contributor

DLP GUI option gone in 6.2.2

Hi Guys,

 

Have noticed that the GUI DLP configuration page is missing from 6.2.2.  I can, of course use the CLI, however, I'm lazy and prefer point and click.  Does anyone know if it's buried deep in the system somewhere?

 

Thanks

1 Solution
oxfordwhite84

I just opened a case regarding this.

 You can apply it to a policy if you:

[ol]
  • create a policy[ol]
  • You need to have the mode/type set to proxy[/ol]
  • In CLI edit the policy
  • set utm-status enable
  • NOW you can set the dlp-sensor[/ol]

     

    Hope that helps folks.

  • View solution in original post

    11 REPLIES 11
    tioeudes
    Contributor

    Don't you have to enable the feature under Feature Visibility?

     

     

     

    ianmclachlan

    You had to in ver 5, but now there is no feature to enable.

    Dave_Hall

    The GUI options seem to have been removed completely in that version

    NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

    NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
    ianmclachlan

    :( Just as I'd feared.  I've discovered it's not working either.

    blntplt42
    New Contributor

    Same problem. I asked distributor company in our country. They said "We have removed this feature in this release. It won't come any more. If you want dlp then you management dlp policy with gui"

    Then I downgrade old firmware. This is unacceptable. I am thinking replace other brand firewall .

     
    nbctcp
    New Contributor III

    Yes, I notice.

    I can create dlp filter and sensor in CLI but I can't put in policy No "set dlp-sensor" anymore

     

    FortiOS Cookbook 6.2.3 still mention DLP GUI on page 856, which is incorrect

    The cookbook mention to use Web Filter instead of DLP

    But on Web Filter

    1. I can't add more extension such as .scr

    2. I can't scan if target server using https or sftp

     

    How to overcome those problems

     

    tq

    http://goo.gl/lhQjmUhttp://nbctcp.wordpress.com
    mcdaniels

    Hi folks,

    I just realized, that all my DLP-Profiles are missing on my FG-60F @ OS 6.2.3 and -of course- just red the nice sentence "DLP Gui was removed".

     

    so, now I had no of my old DLP profiles, which is a real problem. I used DLP the other way. I blocked certain filetypes from downloading.

     

    Why Fortinet has removed this feature. I cannot see the point.

     

    Very disappointing!!!

     

    In my opinion this has a massive impact to security!

    BGMIndustries

    Just came here to say I've just upgraded our new machines, which are going to replace a single FTG, to 6.2.3 and also realized there is no DLP Option from GUI anymore. I wouldn't mind re-creating all polices as Web Filter / E-Mail-Filter, but those filters lack the options to define my own patterns, I can only use the inbuilt onces. This is such a step backwards in security and I have no understanding why Fortinet is going backwards here. DLP was one of my most-used filters as it easily enabled me to control filetypes by patterns. Really disappointing.

    oxfordwhite84

    I just opened a case regarding this.

     You can apply it to a policy if you:

    [ol]
  • create a policy[ol]
  • You need to have the mode/type set to proxy[/ol]
  • In CLI edit the policy
  • set utm-status enable
  • NOW you can set the dlp-sensor[/ol]

     

    Hope that helps folks.

  • Announcements

    Select Forum Responses to become Knowledge Articles!

    Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

    Labels
    Top Kudoed Authors